Graphics

Mine, and decline specific questions - Opens in July
Bamps21
Reactions:
Posts: 752
Joined: Sun Jun 26, 2022 9:41 am

Graphics

Post by Bamps21 »

bbaecbe6-7304-4e21-857d-9e2563afd949.jpeg
27afe67d-02ca-4ef4-b272-670d9c3cd4d5.jpeg
This is from the first set of graphics.
The red one down to 750m is the starter mine, this shows a high cut off >3g/t
This has expanded with the infill drilling a little.
The blue one is showing a lower cut off of 0.5g/t so you can see there is a greater amount of ore included.
If the cut off was taken down to 0.1g/t the size would more than double
NB Minyari is shown at 0.1g/t
Bamps21
Reactions:
Posts: 752
Joined: Sun Jun 26, 2022 9:41 am

Re: Graphics

Post by Bamps21 »

ea24faa5-5bc4-4990-98b3-9d2446c520ea.jpeg
9bb5b94c-fff9-4690-b488-952dfa24bbbb.jpeg
Between the Dyke and the sulphides is an area of breccia at about 600m deep the area of it diminishes to practically zero due to the slope of the Dyke. It’s on the head wall of the Dyke so won’t drop easily.
They’re using this zone to put all the infrastructure to the Eastern and Northern fronts.
That’s ventilation and haul drives.
From these 2 it doesn’t look like they will be mining this.
It has some high grade breccias within it but also some weak crackle breccia.
There’s a chance they may stope it later but it would need to be bottom upwards.
Will the plan change at FS?
Bamps21
Reactions:
Posts: 752
Joined: Sun Jun 26, 2022 9:41 am

Re: Graphics

Post by Bamps21 »

IMG_6246.jpeg
IMG_6245.jpeg
This shows the infrastructure for the starter mine.
It’s tiny compared to the ore body.
The starter mine will pay for progressive infrastructure works going down.
Bamps21
Reactions:
Posts: 752
Joined: Sun Jun 26, 2022 9:41 am

Re: Graphics

Post by Bamps21 »

IMG_6249.jpeg
IMG_6250.jpeg
IMG_6251.jpeg
These are images of the sulphides with grades between 2-3g/t
The brown colours are the attached breccia.
The interesting bit is where the “tail” is heading, certainly looks like it’s going through the Link and Eastern Breccia’s and more than likely going on down 🙂
Bamps21
Reactions:
Posts: 752
Joined: Sun Jun 26, 2022 9:41 am

Re: Graphics

Post by Bamps21 »

ab5cae3a-92b0-4da7-887a-1cb6eb65c350.jpeg
This is from the notes in the MRE RNS talking about crescent zone joining the Link and the Eastern breccia
Bamps21
Reactions:
Posts: 752
Joined: Sun Jun 26, 2022 9:41 am

Re: Graphics

Post by Bamps21 »

IMG_6268.jpeg
IMG_6269.jpeg
IMG_6267.jpeg
Blue is ore above 0.5g/t
Yellow was inferred in crescent some now converted into resources
Green is 0.2 and is the gaps between the blue areas.
These gaps are either low ore grade or areas not estimated due to lack of drilling
Which is where fan drilling will be used to confirm the estimations.
The blue body like shape in earlier posts includes breccia ore below 0.2 and may not be economical to mine and again needs to be fan drilled to prove up especially at the north end.
Bamps21
Reactions:
Posts: 752
Joined: Sun Jun 26, 2022 9:41 am

Re: Graphics

Post by Bamps21 »

IMG_6272.jpeg
IMG_6271.jpeg
IMG_6270.jpeg
These 3 pics show the breccia
Yellow = inferred
Red = indicated Nb! There’s none in the Northern corridor
These would have been updated in the new MRE
The yellow with the original mine plan highlighting where 600,000 ton would have been lost to waste, hopefully this will be recovered in the new mining plan.
Post Reply